Smart Meter Z-Wave Plus rail DIN - QUBINO


Prezzo IVA esclusa: € 99,00

In magazzino
Codice Prodotto:


This Z-Wave Plus module is used for energy measurements in the single-phase power grid up to 65A. This meter directly measures energy in 2-wire networks according to the principle of fast sampling of voltage and current signals. An integrated microprocessor calculates the energy, power and power factor of the measured signals.

This module can also be retrofitted to the Z-Wave home automation controller. In addition, it acts as a repeater to improve the reach and stability of the Z-Wave network.

Designed to be mounted on a DIN rail, this Smart Meter module is the first Z-Wave module installed in an electrical panel.

The module can also control electrical devices (switching on / off) with the addition of the following external relays:

- BICOM432-40-WM1 bistable switch (32A), controlled by the optical communication port (IR)
- Contactor (32A) IKA232-20 / 230 V controlled by the output on terminal 5 

Finally, it should be noted that the QUBINO brand has set obligations of quality and durability: they have carefully selected high-performance components. Numerous quality control tests were also carried out on the module to ensure maximum durability (resistant enough to operate at temperatures ranging from -10 ° C to 40 ° C).

Note: Attention, this module requires the neutral to function.


  • Measurement of overall power consumption or of a circuit
  • Provides voltage, current, active, reactive and apparent power, and power factor
  • Integrates the Z-Wave 500 series chip (Z-Wave +)
  • 250% faster communication compared to standard Z-Wave devices
  • The world's first Z-Wave DIN rail module
  • Operating Temperature -10 to 40 ° C
  • Optical communication port (IR) for external relay BICOM432-40-WM1
  • Output for connecting an external contactor IKA232-20 / 230 V
  • Installation in electrical panel


  • Smart Meter
    • Power supply: 230 V (± 20%)
    • Power consumption: <2W
    • Reference current (Iref): 5 A
    • Maximum current (Imax): 65 A
    • Minimum current (Imin): 0.25 A
    • Starting current: 20 mA
    • Specifications:
      • Power and Active Power:
        • Standard EN 62053-21: Class 1
        • Standard EN 50470-3: Class B
      • Reactive energy:
        • Standard EN 62053-23: Class 2
    • Radio transmission frequency: 868.42MHz, Z-Wave
    • Range: up to 30 m indoors (depending on surrounding materials)
    • Operating temperature: -10 ~ 40 ° C
    • IP protection: IP20
    • Dimensions (W x H x D): 90 x 64 x 36mm
    • Weight: 150g
    • Certifications: CE, RoHs

User manual


Control principale compatibilità
eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Partial Compatible: - Inclusion OK - Exclusion OK - Metering OK - Control NO
Fibaro Home Center Lite v.4.160 Partial Compatible: - Inclusion OK - Exclusion OK - Metering OK - Control NO
Vera Edge / Plus / Secure Not Tested
Zipabox/Zipaminicro/ZipaTile Not Tested
Piper / Piper NV (v.1.7.1) Not Tested
Indigo Not Tested
jeedom Not Tested / Z-Way / PoPP Hub Compatible
Domoticz Not Tested
ZiHome Not Tested
Tech Data
Power Supply 230V
Attachable Loads
Explorer Frames - NWI Support YES
SDK 5.4
App Version Firm 6.5
Device Type Meter
Z-Wave Alliance Product Link
Inclusion Triple Click on button
Factory Reset
Wake Up

Recensioni (1)

Scrivi una recensione

Nota: Il codice HTML non è tradotto!

Negativo            Positivo


Z-Wave Italia

Il negozio online che vende attrezzature di automazione domestica Z-Wave radio. Z-Wave è lo standard internazionale per le reti wireless dei sistemi di controllo nella vostra casa. È possibile gestire l'illuminazione, elettricità, persiane, gli allarmi e altro ancora. I prodotti Z-Wave di fornitori diversi lavorano bene insieme, permettendo il controllo della casa intelligente.