Smart Module FGS-224 - Double Dry Contact - Fibaro

59,99

Prezzo IVA esclusa: € 49,58

Disponibilità:
In magazzino
Codice Prodotto:
ES-23-FIB-FGS-224
Marca:
Fibaro

Non ancora valutato
Scrivi una recensione

Descrizione

The FIBARO Simart Module has been designed to activate and deactivate electrical devices. Thanks to its small size, it can be installed in junction boxes or flush-mounted boxes. The module is controlled either by the Z-Wave network or a simple switch. Connect your FIBARO Smart Module to your Z-Wave system and other devices to take advantage of almost endless possibilities!

This module has two potential-free (dry contact) relays with a timer function (used to create a pulse), so it can be used to change a conventional 230V voltage or any type of DC power source ( 5V, 12V .24 V DC). Therefore, it can be used to control any type of load, such as a boiler (connecting the dry contact instead of a thermostat) or a motorized door, garage door .

The integrated RGB diode is a great help during the installation process. The light will show if the FIBARO Smart Module has been added or removed from the network. You can also see if a calibration or update was successful.

 FUNCTIONS: 

  • Controls two lights / devices remotely Installs behind an existing switch (bistable or monostable) 
  • ON / OFF function 
  • Two potential free relays (door control, boiler, garage door, etc.) 
  • Integrates the Z-Wave 500 series chip 250% faster 
  • Communication compared to standard Z-Wave 
  • Devices Integrated scene trigger mechanism (via S2) 
  • Security communication and notification classes 
  • Diode configuration menu 
  • Supports secure mode (Z-Wave Network Security) encrypted with AES-128 encryption 
  • Integrated Z-Wave Network Coverage Tester 
  • OTA software update (depends on controller) 
  • Larger terminal blocks for easier wiring.
  • Rounded shape to meet the highest standards. 
  • Small, discreet and aesthetic. 
  • Ease of use and installation. 

TECHNICAL CHARACTERISTICS : 

  • Module type: Z-Wave receiver 
  • Power supply: 100 - 240V ~, 50 / 60Hz or 24 - 30 Vdc 
  • Wiring: 3 wires, neutral required (230V) 
  • Maximum power:
    • Maximum current per output: 6A / 110 - 240V ~, 50 / 60Hz (differs depending on the type of load) 
    • Total maximum current: 9.5A / 110 - 240V ~, 50 / 60Hz (differs depending on the type of load) 
  • Frequency: 868.42 Mhz 
  • Transmission distance: 50m free field, 40m indoors (depends on building structure) 
  • Signal strength: 1mW 
  • Dimensions: 42.5mm x 38.25mm x 20.3mm (L x W x H) 
  • Operating temperature: 0-35 ° C 
  • Standards: CE, ROHS, 2011/65 / EU, 2014/53 / EU, 2015/863, ZWAVE PLUS

Specifiche

Control principale compatibilità
eeDomus+
Fibaro Home Center 2 v4.160
Fibaro Home Center Lite v.4.160
Vera Edge / Plus / Secure
Zipabox/Zipaminicro/ZipaTile
Piper / Piper NV (v.1.7.1)
Indigo
jeedom
Z-Wave.me / Z-Way / PoPP Hub
Domoticz
OpenHAB
ZiHome
Somfy Tahoma
Home Assistant
Telldus
Tech Data
IP Rating
FLiRS
Power Supply
Attachable Loads
Explorer Frames - NWI Support
SDK
App Version
Device Type
Z-Wave Alliance Product Link
S2 Security Frame
Procedures
Inclusion
Exclusion
Factory Reset
Wake Up

Recensioni (0)

Scrivi una recensione

Nota: Il codice HTML non è tradotto!

Negativo            Positivo


Continua

Z-Wave Italia

Il negozio online che vende attrezzature di automazione domestica Z-Wave radio. Z-Wave è lo standard internazionale per le reti wireless dei sistemi di controllo nella vostra casa. È possibile gestire l'illuminazione, elettricità, persiane, gli allarmi e altro ancora. I prodotti Z-Wave di fornitori diversi lavorano bene insieme, permettendo il controllo della casa intelligente.

Contattaci

Phone:
+393404556393
E-mail:
info@zwaveit.com
Skype:
palumbrogabriele

Twitter

Facebook