Door/Window Sensor - Z-Wave Plus - Neo CoolCam

29,99

Prezzo IVA esclusa: € 24,79

Disponibilità:
Out Of Stock
Codice Prodotto:
ES-13-NEO-EDS01Z
Marca:
NeoCoolCam

Non ancora valutato
Scrivi una recensione

Descrizione

The NEO Coolcam Door/Window Sensor provides information whether a door or window is opened or closed. The battery operated sensor consits of the main unit and a magnetic element. The main unit should be installed on the frame and the magnetic element is placed on the door or window. The mounting of the 2 elements can be done with screws or stickers. In combination with additional devices of Z-Wave like a siren or motion sensors you can create your own alarm system which promises more safety. All you need is a combination of the mentioned sensors like the Door/Window Sensor and a Z-Wave Smart Home gateway.

Features:

  • Door/Windowsensor
  • Two status: Open or Closed
  • Easy installation with sticker
  • Power supply: 1x battery (CR14250)
  • Battery lifetime: 2 years
  • Scope of delivery: 1x NEO Coolcam Door/Window Sensor, 1x CR14250, mounting equipment
  • Wireless technology: Z-Wave Plus

​Manual :

Specifiche

Control principale compatibilità
eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Full Compatible
Fibaro Home Center Lite v.4.160 Full Compatible
Vera Edge / Plus / Secure Full Compatible
Zipabox/Zipaminicro/ZipaTile Full Compatible
Piper / Piper NV (v.1.7.1) Full Compatible
Indigo Full Compatible
jeedom Full Compatible
Z-Wave.me / Z-Way / PoPP Hub Full Compatible
Domoticz Full Compatible
ZiHome Full Compatible
Somfy Tahoma Not Tested
Home Assistant Not Tested
Telldus Not Tested
Tech Data
IP Rating IP20
FLiRS No
Power Supply 1x battery (CR14250) CR2 3V
Explorer Frames - NWI Support No
SDK 6.51.06
App Version HW: 65 FW: 3.61
Device Type Notification Sensor
Z-Wave Alliance Product Link https://products.z-wavealliance.org/products/1782
Procedures
Inclusion Add the Sensor (Door/Window detector) to Z-Wave Network 1.Remove the sensor cover. 2.Make sure the sensor is powered. 3.Set Z-Wave controller or Z-Wave gateway into inclusion mode (Refer to the controller or gateway operating manual) 4.Press the button three times within 1.5 second, the device will enter inclusion mode. And the LED will flash on and off alternately five times.
Exclusion Delete the Sensor (Door/Window detector) from Z-Wave Network 1.Remove the device cover. 2.Make sure the sensor is powered. 3.Set Z-Wave controller or Z-Wave gateway into exclusion mode (Refer to the controller or gateway operating manual) 4.Press the button three times within 1.5 second, the device will enter exclusion mode.
Factory Reset Note: to use the reset procedure only when the primary controller is missing or inoperable. Restore the Sensor (Door/Window detector) to Factory Default Settings Reset procedure will delete all information on the Z-Wave network and Z-Wave controller or Z-Wave Gateway, and restore the sensor to factory default settings. 1.Remove the device cover. 2.Make sure the sensor is powered.
Wake Up Manual Wakeup the Sensor You can press the button once to wake up the device and send wakeup notification to controller. If press successfully, the LED will blink one time.

Recensioni (0)

Scrivi una recensione

Nota: Il codice HTML non è tradotto!

Negativo            Positivo


Continua

Z-Wave Italia

Il negozio online che vende attrezzature di automazione domestica Z-Wave radio. Z-Wave è lo standard internazionale per le reti wireless dei sistemi di controllo nella vostra casa. È possibile gestire l'illuminazione, elettricità, persiane, gli allarmi e altro ancora. I prodotti Z-Wave di fornitori diversi lavorano bene insieme, permettendo il controllo della casa intelligente.

Contattaci

Phone:
+393404556393
E-mail:
info@zwaveit.com
Skype:
palumbrogabriele

Twitter

Facebook