Z-Wave.Me - Z-Uno Shield sealed case


Prezzo IVA esclusa: € 74,37

In magazzino
Codice Prodotto:
Z-Wave Me

Non ancora valutato
Scrivi una recensione


To help users and installers to work with Z-Uno the Z-Uno Shield was created.

Z-Uno Shield is a multifunctional smart home device based on Z-Uno, with a sealed case. It implements most useful features of Z-Uno and requires no soldering and no programming.

No soldering required!

Z-Uno Shield is very easy to wire. It allows to connect many smart home actors and sensors out of the box:

  • One 0-10 V analog output
  • control industrial dimmers Up to four PWM or switch outputs (up to 5 A per channel)
  • control contactors, switches, halogen bulbs or LED strips Up to eight digital 0/3 V inputs or outputs
  • connect various low voltage digital senors and actors Up to four digital 0/3, 0/5 or 0/12 V digital or analog inputs
  •  connect industrial 10 V sensors or any Arduino-compatible sensor RS485 or UART
  • for industial meters OneWire
  • for DS18B20 or other sensors

For those who still want to solder something there is a bread board for your additional components.

No programming required!

The Z-Uno Shield Configurator will not only help you to wire your Z-Uno Shield correctly, but will also write the Z-Uno sketch for you. Most popular cases are covered by this tool. You can still modify the generated code or write your own sketch.

Z-Uno Shield Configurator allows you to create:

  • Dimmers and Blinds Switches
  • Sirens
  • Valve controls
  • Door locks Sensors
  • Thermostats

Scope of delivery:

  • Z-Uno
  • Z-Uno Shield
  • Saled case + accessoires


Control principale compatibilità
eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Not Tested
Fibaro Home Center Lite v.4.160 Not Tested
Vera Edge / Plus / Secure Not Tested
Zipabox/Zipaminicro/ZipaTile Not Tested
Piper / Piper NV (v.1.7.1) Not tested
Indigo Not tested
jeedom Full Compatible
Z-Wave.me / Z-Way / PoPP Hub Full Compatible
Domoticz Not tested
OpenHAB Not tested
ZiHome Not tested
Tech Data
Power Supply USB 5 V, external 5V or 3 V, external 7-18 V or battery (via MU-2F connector, included)
Attachable Loads Defined by user: http://z-uno.z-wave.me/examples/Certified10Channels/
Explorer Frames - NWI Support Yes
SDK 6.51.06
Device Type Always On Slave
Z-Wave Alliance Product Link http://products.z-wavealliance.org/products/1825
Inclusion Press Service button three times
Exclusion Press Service button three times
Factory Reset Hold Service button for five seconds, then press Service button three times. Use this procedure only if your controller is missing or inoperable. Note that the user sketch is not erased during exclusion or reset process.

Recensioni (0)

Scrivi una recensione

Nota: Il codice HTML non è tradotto!

Negativo            Positivo


Z-Wave Italia

Il negozio online che vende attrezzature di automazione domestica Z-Wave radio. Z-Wave è lo standard internazionale per le reti wireless dei sistemi di controllo nella vostra casa. È possibile gestire l'illuminazione, elettricità, persiane, gli allarmi e altro ancora. I prodotti Z-Wave di fornitori diversi lavorano bene insieme, permettendo il controllo della casa intelligente.